Nitrogen Generator

LC/MS Nitrogen Generators

Approx Price: Rs 3.50 / approx 
NITROGEN GENERATORS FOR LC/MS

Nitrogen Generator for LC-MS / LC-MS-MS

Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.

The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.

Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.

During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.

Flow range available from 10 LPM to 30 LPM and above.

SPECIFICATIONS

For LC-MS (TNG-02L)

For LC-MS-MS (TNG-02LS) (for Sciex model)

 

Flow rate Capacity of N2 Generator

6 to 30 LPM

(as per selection of model)

12 LPM (filtered zero air)

8 LPM ( purified dry air)

4 LPM (pure nitrogen)

Pressure

5 kg/cm² or 100 psig / 60 psig

Purity

99.995%

> 99.995%

Moisture

2 ppm

2 ppm

Total Hydro Carbon

< 0.5 ppm

< 0.5 ppm

CO & CO2

< 2 ppm

< 2 ppm

Micro Particulates

< 0.01μ

< 0.01μ

Method of purification

Pressure Swing Adsorption

Room temperature

5 °C - 45 °C

Startup time

1 hrs / programmable timer

Electrical requirements without Compressor

230 V AC, 50 Hz, 1 Ph, 2 Amp


CE  Certified   

We Modify all type of LC/MS & LC MSMS Nitrogen Genrator, Parker LCMS Nitrogen Generator, Peak Scientific LCMS Nitrogen Generator, Domnik LCMS Nitrogen Generator

Food Packaging - Nitrogen Generators

Approx Price: Rs 4.50 / Piece 

Nitrogen Generator Model TNG-02T for Food Packaging

Nitrogen Gas Generator

N2 Gases for Food Packaging Purity (99%) which consist of

a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.

b) Automatic Heatless Air dryer time based operation

c) Surge receiver with pressure regulator & valve inbuilt

d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank

Air Filters for moisture, dust and oil, mist removal (set of 2 filters)

Method of Purification : PSA (pressure swing adsorption) & Depressurizations

Valves: PLC Based Pneumatic 2 Way.

Gas outlet : ¼” or ½” BSP male

Built in reservoir : storage tank provided

Power Supply : 230V AC 50 Hzs 1Ph 1.5

Micron Filters : micron filters provided

Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.

Warranty and Spares : 1 year from the date of acceptance

Capacity :- 50 LPM to 1500 LPM
Purity : 99 %
Pressure : 7 kg/cm2 (100psi)

CE Certified

NITROGEN GAS GENERATOR FOR Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.

Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.

 


Additional Information:
  • Minimum Order Quantity: 1 Piece

LC-MS-MS Nitrogen Gas Generator

Approx Price: Rs 3.85 / Unit 
LC-MS-MS Nitrogen Gas Generator 
LC/MS Nitrogen Generator
 Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected pressure.
• The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
• Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
• During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
• Flow range available from 10 LPM to 30 LPM and above.
CE Certified 

Salient Features:

·         Deliver constant pressure & flow             * Fully Automatic Programmable System

·         Easy Maintenance and space saving        * Effortless and easy operation

·         Improves instrument performance

·         Fully regenerative, durability with PSA (pressure swing absorption) technology



N2 Generator for LCMS: 
SPECIFICATIONS For LC-MS-MS (TNG-02LS)  (for Sciex model) 
Flow rate Capacity of N2 Generator12 LPM  (filtered zero air) 
8 LPM  ( purified dry air) 
4 LPM  (pure nitrogen) 
Pressure 5 kg/cm² or 100 psig or 60 psig
Purity > 99.99% 
Moisture 5 ppm 
Total Hydro Carbon < 0.5 ppm 
CO & CO2 < 2 ppm 
Micro Particulates < 0.01μ 
Method of purification Pressure Swing Adsorption 
Room temperature 5 °C - 45 °C 
Startup time 1 hrs / programmable timer 
Electrical requirements without Compressor 230 V AC, 50 Hz, 1 Ph, 2 Amp 


LCMS Tri Gas Generator for AB Sciex Systems

Approx Price: Rs 3.60 / Unit 
  • LCMS TriGas Generator for AB Sciex Systems
Features:
  • Easy maintenance and space saving
  • Effortless and easy operation
  • Improves instrument performance

Salient Features:

  • Deliver constant pressure & flow
  • Fully Automatic Programmable System
  • Easy Maintenance and space saving
  • Effortless and easy operation
  • Improves instrument performance
  • Fully regenerative, durability with PSA (pressure swing absorption) technology

Nitrogen Generator for LC-MS / LC-MS-MS

Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.

The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.

Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.

During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.

Flow range available from 10 LPM to 30 LPM and above.

 

Technical Specification for N2 Generator for LCMS:

SPECIFICATIONS

For LC-MS (TNG-02L)

For LC-MS-MS (TNG-02LS) (for Sciex model)

Flow rate Capacity of N2 Generator

6 to 30 LPM (as per selection of model)

12 LPM (filtered zero air)

8 LPM ( purified dry air)

4 LPM (pure nitrogen)

Pressure

5 kg/cm² or 100 psig or 60 psig

Purity

99.90%

> 99.99%

Moisture

5 ppm

5 ppm

Total Hydro Carbon

< 0.5 ppm

< 0.5 ppm

CO & CO2

< 2 ppm

< 2 ppm

Micro Particulates

< 0.01μ

< 0.01μ

Method of purification

Pressure Swing Adsorption

Room temperature

5 °C - 45 °C

Startup time

1 hrs / programmable timer

Electrical requirements without Compressor

230 V AC, 50 Hz, 1 Ph, 2 Amp

Nitrogen Gas Plant

Approx Price: Rs 5.5 / Unit 
Nitrogen Gas Generator Plant
PSA Nitrogen Gas plant Generator

Nitrogen Generator for Purging

Nitrogen Generator for FTIR Purging / Food Packing
Nitrogen Gas Generator

N2 Gases for Food Packaging Purity (99%) which consist of

a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.

b) Automatic Heatless Air dryer time based operation

c) Surge receiver with pressure regulator & valve inbuilt

d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank

Air Filters for moisture, dust and oil, mist removal (set of 2 filters)

Method of Purification : PSA (pressure swing adsorption) & Depressurizations

Valves: PLC Based Pneumatic 2 Way.

Gas outlet : ¼” or ½” BSP male

Built in reservoir : storage tank provided

Power Supply : 230V AC 50 Hzs 1Ph 1.5

Micron Filters : micron filters provided

Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.

Warranty and Spares : 1 year from the date of acceptance

Capacity :- 50 LPM to 10000 LPM
Purity : 99 % / 99.99%
Pressure : 7 kg/cm2 (100psi)

CE Certified

Nitrogen Gas Generator For Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.

Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.


Additional Information:
  • Minimum Order Quantity: 1 Unit

Nitrogen Generator for LCMS

Approx Price: Rs 3.59 / Unit 
Nitrogen Generator for LCMS
Nitrogen Generators For LC/MS

Nitrogen Generator for LC-MS / LC-MS-MS

Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.

The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.

Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.

During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.

Flow range available from 10 LPM to 30 LPM and above.

SPECIFICATIONS

For LC-MS (TNG-02L)

For LC-MS-MS (TNG-02LS) (for Sciex model)

 

Flow rate Capacity of N2 Generator

6 to 30 LPM

(as per selection of model)

12 LPM (filtered zero air)

8 LPM ( purified dry air)

4 LPM (pure nitrogen)

Pressure

5 kg/cm² or 100 psig / 60 psig

Purity

99.995%

> 99.995%

Moisture

2 ppm

2 ppm

Total Hydro Carbon

< 0.5 ppm

< 0.5 ppm

CO & CO2

< 2 ppm

< 2 ppm

Micro Particulates

< 0.01μ

< 0.01μ

Method of purification

Pressure Swing Adsorption

Room temperature

5 °C - 45 °C

Startup time

1 hrs / programmable timer

Electrical requirements without Compressor

230 V AC, 50 Hz, 1 Ph, 2 Amp


CE Certified

We Modify all type of LC/MS & LC MSMS Nitrogen Genrator, Parker LCMS Nitrogen Generator, Peak Scientific LCMS Nitrogen Generator, Domnik LCMS Nitrogen Generator


Additional Information:
  • Minimum Order Quantity: 1 Unit

Nitrogen Generator for Purging

Approx Price: Rs 1.8 / Unit 

Nitrogen Generator for Purging 

Nitrogen Generator for FTIR Purging / Food Packing 
Nitrogen Gas Generator

N2 Gases for Food Packaging  Purity  (99%) which consist of

a)     N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.

b)     Automatic Heatless Air dryer time based operation

c)      Surge receiver with pressure regulator & valve inbuilt

d)     Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank

Air Filters for moisture, dust and oil, mist  removal (set of 2 filters)

Method of Purification : PSA (pressure swing adsorption) & Depressurizations

Valves: PLC Based Pneumatic 2 Way.

Gas outlet : ¼” or  ½” BSP male

Built in reservoir : storage tank provided

Power Supply : 230V AC 50 Hzs   1Ph 1.5

Micron Filters : micron filters provided

Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.

Warranty and Spares : 1 year from the date of acceptance

Capacity :- 50 LPM   to  1500 LPM  
Purity : 99 % 
Pressure : 7 kg/cm2 (100psi) 

CE Certified 

NITROGEN GAS GENERATOR FOR Food Packaging 
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc. 

Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY  range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively. 

Hydrogen Nitrogen and Air Combination Gas Generator

Approx Price: Rs 3.50 / approx 

Nitrogen & Hydrogen & Air Generator


Characteristics


Athena N2 & H2 & Air generators achieve the perfect combination of nitrogen, hydrogen and Air. Compact structure and easy operation make it the ideal gas generator. This product can be applied to various gas chromatography and analysis instruments at home and abroad.

 

Features

 

  1. It can replace traditional high pressure cylinders. N2, H2 and air are generated separately or together, intermittently or continuously. The purity of gas will not decay for long time use.
  2. Easy to operate, switching power on to produce gas, regular output flow, completely automatic tracking equipment.
  3. Generate nitrogen through world's leading Pressure Swing Adsorption (PSA) technology, which replaces the traditional electrolyte separation technology. It is safe and convenient to operate, has no corrosion toward instrument and supplies gas for 24 hours.
  4. Generate hydrogen through world leading SPE (PEM) technology. No longer need to add lye. Without alkali reversion.
  5. It's powered by whole sealing silent air compressor. After purification, water, oil, dust and impurities are removed. Through pressure stable system, pure and silent air is finally produced under stable pressure.


Technical Parameters


Model

AT-NHA300

Gas Type

Nitrogen

Hydrogen

Air

Output Flow (ml/min)

0-300

0-300

0-1000

Output Pressure (MPa)

0-0.4

Purity(%)

99.99

99.999

Three-level Purification

CO2:0.039%

Oil: 0.54ppm

Power Consumption (W)

<350

Power Voltage (V)

AC 220 50-60Hz

Weight (Kg)

55

Dimension (L*W*H)mm

460*440*460

 

Note : Higher capacity model also available


Additional Information:
  • Minimum Order Quantity: 1 approx

High Purity Nitrogen Generators

Approx Price: Rs 3.55 / Unit 
  • High Purity Nitrogen Generators

 Nitrogen & Zero Air Generator  for GC

Combination Gas Generator Model-ATNA-01A of                                                 Zero Air & N2 Gases for (for Max. 5 GC’S )

a) Air Dryer timer based operation

b) N2 purifier to remove O2 & all other unwanted

impurities & produces N2 upto Purging grade

c) Surge receiver with pressure regulator & valve inbuilt

d) Air Filters for removes moistures                                                       Capacity of N2 Gas: 500 ml/min at 5 Kg/cm²                                                      Capacity of Zero Air gas : 4000 ml/min at 5 Kg/cm²

Purity : 99.999%

Nitrogen Gas Generator for 5 GCs

a) Air Dryer timer based operation

b) N2 purifier to remove O2 & all other unwanted

impurities & produces N2 upto Purging grade

c) Surge receiver with pressure regulator & valve inbuilt

d) Air Filters for removes moistures                                                       

N2 Generator Model-ATN-02A of N2 Gas for Maximum 5 GC`S)

Capacity N2 Gas :- 500 ml/min at 5 kg/cm²

Purity : 99.999%

Zero Air Generator Model - ATZ-01  which will required oil free Air Compressor for GC for Max. 5 G.C.'S

Capacity :- 4000ml/min at 4 kg/cm² 

High Capacity Nitrogen Gas Generator

Approx Price: Rs 5.20 / approx 

High Capacity Nitrogen Gas Generator

Nitrogen Gas Generator

N2 Gases for Food Packaging Purity (99%) which consist of

a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.

b) Automatic Heatless Air dryer time based operation

c) Surge receiver with pressure regulator & valve inbuilt

d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank

Air Filters for moisture, dust and oil, mist removal (set of 2 filters)

Method of Purification : PSA (pressure swing adsorption) & Depressurizations

Valves: PLC Based Pneumatic 2 Way.

Gas outlet : ¼” or ½” BSP male

Built in reservoir : storage tank provided

Power Supply : 230V AC 50 Hzs 1Ph 1.5

Micron Filters : micron filters provided

Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.

Warranty and Spares : 1 year from the date of acceptance

Capacity :- 50 LPM to 1500 LPM
Purity : 99 %
Pressure : 7 kg/cm2 (100psi)

CE Certified

NITROGEN GAS GENERATOR FOR Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.

Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.

 


Additional Information:
  • Minimum Order Quantity: 1 approx
Looking for Nitrogen Generator ?
© Athena Technology
 
Desktop Site Back to top