- Minimum Order Quantity: 1 Piece
- Brand: Athena
- Model: GC-1120
- Application: Laboratory Use
Hydrogen Flame Ionization Detector (FID)
Minimum detectable quantity: M≤8×10-¹²g/s (C16)
Best test result: M≤3×10-¹²g/s (C16)
Linearity range: ≥106
Thermal Conductivity Detector TCD
Sensitivity:≥5000mV mL/mg (C16)
Linearity rang: ≥10
High Sensitivity Thermal Conductivity Detector
Sensitivity: ≥10000mVmL/mg (C16)
Electron Capture Detector ECD
Detectability: ≤1×10-¹³g/s (γ-666)
Linearity range: ≥103
Maximum using temperature: 350℃
Flame Photometric Detector FPD
Detectability: ≤2×10-¹¹g/s P (Parathion-methyl)
≤1×10-¹ g/s S (Parathion-methyl)
Nitrogen-Phosphorus Detector NPD
Detectability: ≤5×10-¹²g/s N (Azobenzene)
≤5×10-¹³g/s P (Malathion)
Photoelectric Ion Detector PID
Detectability: ≤1ppb (Benzene)
Temperature Range 7 ℃ ~ 400 ℃ above room temperature, (increment 1℃)
Temperature Control Object Column Box, front and back detector, front and back sampler, assist total six channels.
Program ramps : 7 ramps in total
Program setting 0.1℃~40℃/min increment 0.1℃Total time of total program : Up to 655 minutes, (increment 0.1℃)
Flexible Sample Introduction System
Up to three injectors may be installed and operated simultaneously with independent temperature control.
Wide range of injectors is available to be chosen from for various applications. It is very convenient for
installation and disassembly of sample injectors.
Sample Injector with Mono Packed Column/Double Packed Columns
Several alternative sample introduction methods, including on-column sample introduction and six-way valve injection;
Adapter for injection to capillary column (0.53 mm i.d.).
Sample injector for capillary column
Special sample injector with septum purge and back-pressure valve splitting;
Special programmable split/splitless injector with solenoid valve, septum purge, back-pressure valve splitting, and standalone carrier gas and make-up gas flow;Modified dual-packed-column sample injector for injection to capillary column by employing some connectors and back-pressure valve splitting.
Carrier gas control with constant pressure valve and constant flow valve;
Air and hydrogen control with constant pressure valve and needle valve;
Flow easily adjustable through constant flow valve and needle valve with digital display;
High precision, reproducibility and reliability.
Up to three detectors (FID, TCD, ECD, etc) may be installed and operated simultaneously. Simultaneous
multi-detection with detectors in series or in parallel meets the various analysis requirements.
The new FID provides higher sensitivity than ever before. It is very convenient to disassemble and clean the jet and collector. Precisely fixed emitter configuration ensures conformity of product performance;
Excellent TCD detector with high-resistance tungsten-rhenium filaments provides high sensitivity. A sensitivity of 10000 mV·mL/mg is achieved with optional amplifier circuit board. Special configuration of air heat insulation enhances the stability of TCD detector